[TuTo] how to do a support to your Iphone

If there are things that you do not understand, do not hesitate to ask questions ...


Materials needed: plexiglass plate empty, candle, felt pen, rulers, paint (optional).

Time required: it depends on the people, for the more talented half an hour, others take your time, the result will be more successful! Good luck ...




1) Take a sheet of plexiglass ...

2) Take a ruler and measure from the edge ...

3) as in the photo, YMMV for length, is the choice ...

4) light a candle, it is that you can bend the plexi, follow the lines you have drawn, with the flame heat until you can bend the plexi. Warning it can be hot ...

5) fold to achieve the desired angle, it's your taste, too, although expect to cool down the plexi so that it keeps its shape,




http://img402.imageshack.us/img402/5742/dsc0032nm8.jpg

to save time pass once under cold water to freeze ...






6) made this for all the features you have drawn ...

http://img402.imageshack.us/img402/4610/dsc0042ex7.jpg




7) and this is your final form ...


Gross:

http://img410.imageshack.us/img410/5290/dsc0045ca4.jpg


and clean:

Here is the bracket. if you prefer you can leave it transparent. Class not ...

is that your iPhone is happy ...

9) paint, black (in my case) to keep the style Iphone, or white for the pure apple style ...

For drawing as for apple REAR example, take the image you want to cut it and made a cache before giving the painting simple and effective ....




You let it dry and it's over
For the shapes and colors you can do what you want.




Good luck! I am available for advice and explanations ...




Be creative and feel free to show your creations on the forum ...


Thank you for your reading ... ...